Our turf is made of the finest polypropylene tufts, and they are both UV and wear warranted.
We offer different types of material (Poly & Nylon) for:
-
Putting and 10 to 20 yard chip shots
-
Putting and shots from over 100 yards
-
Fringe, approach, and landscape grass
-
Tee boxes
-
Construction of athletic fields
-
Tennis courts
-
Bocce courts
The infill system uses a specially graded round silica sand or a combination of ground rubber and sand, depending on application, that will always drain well, and never compact. The base we use is a compactable crushed stone, or stonedust.We tamp and roll the base so smoothly that we recommend you putt on it before it is completed, in order to find the breaks and rolls, and set your pin locations. We can always increase or decrease the breaks this way, and you get the customized putting green that you want.
Installation Information
dpGreens uses a multi-step installation process that takes approximately 8 to 10 hours for a 12' X 20' green. That means that we can start an installation in the morning, and you can be putting on it that same evening!
First, we outline the spot that you pick on your lawn. Then geo-textile fabric is cut in the shape of the green and laid down to prevent plants from penetrating into the base of the green. On top of this, crushed stone or stone dust is brought in to make a solid base for the green. This base is leveled, packed, and contured to your specifications. We can make the green break virtually any place and any direction that you desire. Now it is time to set the cups. Our turf is set down on the base and the cups are marked. The infill mixture is prepared and spread onto the green evenly with a drop spreader. It is then brushed into the turf. This process is repeated until the infill almost completely covers the fibers of the turf. The turf is trimmed around the cups, and last, but not least, the flags are put in.
Request Info
